A big fan of darts tournaments must have been aware of the importance of learning how to sharpen steel tip darts.
For great performances, maintaining the right sharpness for your darts’ tip is essential. Sharpening the tip will keep the darts away from burrs and deter them from bouncing out of dartboards.
However, not every dart gamer knows how exactly the sharpness should be and how to correctly take care of the darts. Now, let’s dive right into the answer!
- The Best Freestanding Dartboards You Should Know About
- Should I Buy A Dart Case? A Complete Review Of The Best Dart Cases
What Happens When You Don’t Sharpen Your Darts In The Right Way
An acceptable dart tip should be shaped into a rounded point to be stronger and harder to damage. A rounded point will also have a better chance of deflecting off the spider and sticking to the board. So what if your darts aren’t shaped in the right way?
Very sharp darts will have a bad impact on how well you perform. The pointy tip that hits the dartboard spider will dig into the wire or blade and bounce out, damaging the dart point and the spider at the same time.
To be precise, a pointy dart is likely to penetrate the spider instead of passing it, posing a knick in the alloy. In the long-term use, your wiring will accumulate more and more scratches, ruining the board. Besides, darts bouncing off onto the ground means you lose your score!
Plus, not only will overly-pointed darts hurt your games but also your skin. Your fingers may be injured or blooded if you are accidentally run them over the dart’s point.
Basically, when a correctly repointed dart sticks in, the tip doesn’t rupture the board. Instead, it’ll only separate the fibers and grasp them to keep itself fixed in place. When you remove the dart, those fibers will turn back to the previous position without being damaged.
Nevertheless, a blunt tip tends to smash the fibers, rather than gliding between them and weaving a way for itself. As a result, noticeable holes appear, ruining your dartboard. That is why dull darts are one of the primary causes of excessive wear on the boards.
Blunted tips often bounce out when hitting the spider since the dart’s flattened end won’t penetrate through the sisal fibers. Like pointy darts, blunt ones will end up falling onto the floor, getting you no score!
How To Sharpen Steel Tip Darts Properly
Users can apply a broad range of methods to sharpen steel tip darts. Below are several simple yet effective tools and tips for adopting.
An excellent tool for sharpening the point of a dart is a sharpener. It’s inexpensive and available from online dart suppliers or in any dartboard store.
To start sharpening, first, you hold the dart vertical to the sharpener with the tip and one of the narrow sharpener grooves. Then grind the optimal diameter on the point with light pressure.
After that, please hold the dart at an oblique angle to the sharpener surfaces and grind a conical profile evenly about the rounded point.
Finally, you must grind microscopic grooves into the end ¾ of an inch or so of the point. Press the tip into the groove and rotate the dart about ten times.
The grooves will help to keep the dirt from falling out. As they’re not very deep, so they won’t damage the board’s bristle structure when the dart is retrieved.
Please remember to rotate the dart while grinding and change your grip periodically. This act assures a conical shape that blends perfectly with the rounded tip and avoids flat spots.
Using sandpaper is also an amazing way to treat your steel tip darts. You simply need to follow these steps:
- Go find some standard grade sandpaper, especially those for metal.
- Put the sandpaper strip on a smooth surface.
- Position the dart perpendicular to the paper. Slightly move the tip from side to side and rotate the dart about clockwise and counterclockwise. This will help achieve a perfectly rounded tip.
- Remain the tip in the grade sandpaper. At the moment you pull the dart out, twist it gently to create nice coil-shaped scuffs without burrs on the pointed edge.
Flat stones, rectangular sharpening stones, or round sharpening stones are noteworthy tools to put into practice. Despite not being as easy to use as sharpeners or sandpaper, they’re still an ideal option.
Repointing steel tip darts with flat stones requires quite similar steps to sharpeners:
- Grind the appropriate radius on the point. Place the dart perpendicular to the sharpening stone. Slightly rotate it side to side and shift it back and forth at the same time.
- Shape a tapered profile around the point.
- Rough up the edges at about ¾-inch end.
Apart from the mentioned methods, dart players can also consider other tools when preparing for steel tip darts sharpening. Our recommendations are emery cloth, fish hook sharpeners, whetstones, and nail files.
How Often Should You Sharpen Your Darts?
Indeed, sharpening your darts after every playtime, every day, week, or month is unnecessary. Instead, you should check your darts frequently and only repoint them if needed. Commonly, users inspect their darts whenever they are to use them.
Other cases when you should sharpen your darts include the situations where there are impacts that may blunt your dart tips. Repeated fall-onto-floor times also count.
What’s more, if you’ve purchased a new set of darts, we advise you to repoint them before using them. The new darts are often relatively smooth and have some kind of paint on them, potentially reducing your darts’ grip and leading to many bounce outs!
Studying how to sharpen steel tip darts is tremendously crucial as it is the easiest way to perform better. Should you desire to have the best experience any playtime, you need to take our detailed guide into account.
We hope our blog gives you a hand to enjoy your games more. If it does, please leave a comment to let us know!
You may also like: